Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
AfterChimney Cleaning in Marietta, GA
A Level 2 chimney inspection and cleaning in Marietta typically runs $199-$289 and includes a camera-scan of the flue, a written condition report, and a photo record. Most Marietta homes need this service annually if wood-burning, or every two to three years for gas systems. Call us at (470) 480-0885 to schedule or get a written estimate before anyone arrives.
We see two very different chimneys in Marietta: the soft-lime-mortar masonry stacks around the historic Square, and the hidden prefabricated metal fireboxes behind East Cobb brick facades. Both fail differently. Our Chimney Cap & Crown and Chimney Liner & Rebuild work addresses the most common failure modes we find here.
Why Marietta Homes Are Different
Marietta’s chimney market splits cleanly in two. Around the historic Marietta Square district, antebellum and Victorian-era masonry chimneys were built with softer lime mortars that absorb moisture readily and spall badly during the periodic hard freezes that drop temperatures into the teens. These chimneys need crown integrity and mortar repointing more than liner work.
East Cobb’s 1970s-1990s subdivisions, the Walton, Pope, and Wheeler zones, present the opposite problem. Homeowners there almost universally believe they own masonry fireplaces because they see brick facing. The actual firebox is a factory-built metal unit hidden behind it, now 30-45 years old and past its 20-25 year rated service life. Discovering that distinction, and explaining why it matters for liner condition and NFPA 211 code compliance, is part of nearly every call we take from those zip codes.
Our long humid summers compound both problems. Six-plus months without drying heat cycling through the flue accelerates moisture-driven mortar deterioration in historic stacks and rust in prefab fireboxes. The work we recommend depends entirely on which Marietta you live in.
Our Main Marietta Services
These are the services Marietta homeowners call about most. We route you to the right crew based on what the camera finds.
Chimney Sweep in Marietta
Our Chimney Sweep in Marietta service starts with a Level 2 inspection: camera down the flue, smoke chamber and firebox photographed, written condition report delivered. We remove Class I, II, or III creosote deposits, check for obstructions, and document everything under Haven Standard Clause 4. Historic masonry and prefab systems both need this, though the cleaning approach differs.
Chimney Repair in Marietta
Our Chimney Repair in Marietta crews handle mortar repointing, crown reconstruction, and leak diagnosis. Around the Square, we repoint with compatible lime mortar, not Portland cement, to preserve historic brick. In East Cobb, we repair the chase cover and chase pan failures that let water destroy prefab fireboxes from the top down.
Fireplace Services in Marietta
Our Fireplace Services in Marietta cover gas log set installation, fireplace door fitting, and damper repair. We size inserts to the actual firebox dimensions, not the facing, which matters enormously in East Cobb homes where the metal unit behind the brick is smaller than it appears.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in Marietta
Cap and crown work in Marietta is shaped by two realities: the porous 19th-century brick around the historic Square that soaks up water all summer, and the chase-top rot in East Cobb prefab systems where the galvanized chase cover rusts through after 25-35 years. Both let water into the flue, but the repair differs. We install caps and rebuild crowns using materials from Famco and Copperfield, sourced through Haven’s buying network to keep prices honest. Chimney Cap & Crown details are on our hub page.
Cap Installation
Signs you need it
Water staining on the firebox walls, rust flakes in the hearth, or birds nesting in the flue opening mean your flue is unprotected.
What it costs in Marietta
Single-flue cap installation in Marietta runs $180-$340, with multi-flue custom caps ranging $380-$620 depending on flue count and mesh specification.
How we do it
We measure the flue tile or chase opening, fabricate or order the cap from Famco or Copperfield stock, and secure it with masonry screws or a top-mount collar with a written warranty.
Crown Repair
Signs you need it
Crown cracks wider than 1/8 inch, pieces missing at the edges, or water pooling on the crown surface after rain indicate structural failure.
What it costs in Marietta
Crown repair in Marietta ranges $450-$890 for crack sealing and resurfacing; full crown rebuilds run $1,200-$2,400 depending on chimney width and accessibility.
How we do it
We grind out cracks, apply a bonding agent, pour new high-early-strength concrete with a proper drip edge and slope, then photograph the finished crown for the Clause 4 record.
What Chimney Cap & Crown Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Single-flue cap installation | $180 - $340 |
| Multi-flue cap installation | $380 - $620 |
| Crown crack repair / coating | $450 - $890 |
| Full crown rebuild | $1,200 - $2,400 |
Do I need a cap if my chimney is in good shape?
Yes. An uncapped flue in Marietta collects rainwater, leaf debris, and animal nests that accelerate liner deterioration and create blockage hazards. The cap costs less than one water-damage repair.
Can crown cracks wait until next year?
Small cracks widen through freeze-thaw cycles, and Marietta’s hard freezes, though infrequent, hit when chimneys are saturated from humid summers. We photograph the crack width and show you the progression risk before you decide.
Chimney Liner & Rebuild in Marietta
Liner and rebuild work dominates our Marietta calls for two reasons: the deteriorating clay flue tiles in historic Square chimneys, and the factory-built metal fireboxes in East Cobb that have exceeded their rated service life and now present real fire and carbon monoxide hazards. We use DuraFlex and HeatShield materials, selected for each application and priced in writing before work begins. Chimney Liner & Rebuild specifications are on our hub page.
Stainless Steel Liner
Signs you need it
Clay tile chunks in the firebox, visible cracks in the flue wall on camera inspection, or a failed NFPA 211 Level 2 inspection for solid-fuel appliance use.
What it costs in Marietta
Stainless steel liner installation in Marietta ranges $2,800-$4,500 for a typical single-flue residential chimney, including the connector, top plate, and termination.
How we do it
We drop a video camera first to map the flue condition, then install a correctly sized DuraFlex liner with proper insulation clearance and a new cap, documenting every stage with photos.
Partial Rebuild
Signs you need it
Spalled brick above the roofline, a leaning stack, or mortar loss deep enough to expose the flue liner to weather indicate the upper chimney structure has failed.
What it costs in Marietta
Partial rebuild of the upper chimney in Marietta runs $3,500-$7,000 depending on height, brick matching requirements, and whether scaffold or ladder access suffices.
How we do it
We dismantle to sound masonry, salvage matching brick where possible, rebuild with compatible mortar, and install a new crown and cap before the Clause 4 photo record.
What Chimney Liner & Rebuild Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Stainless steel liner installation | $2,800 - $4,500 |
| Flexible liner (offset flues) | $3,200 - $5,100 |
| Partial chimney rebuild | $3,500 - $7,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Does my prefab fireplace need a liner at all?
Factory-built fireplaces use a listed metal chimney system, not a clay flue liner, but that metal chase rusts out after 30-45 years. We camera the chase to confirm integrity; if it’s failing, replacement is the only code-compliant option.
How long does a liner installation take?
Most residential stainless steel liner installations in Marietta are completed in one day; partial rebuilds typically require two to three days including cure time for mortar and crown concrete.
Brands We Service in Marietta
We stock and install caps, liners, and repair materials from Famco, Copperfield, DuraFlex, and HeatShield, procured through Haven’s buying network. Most standard items are on the truck; specialty orders arrive in two to three business days. See our brands for full specifications.
Pricing for Chimney Cleaning in Marietta, GA
| Service | Typical range in Marietta |
|---|---|
| Level 2 inspection with camera scan | $199 - $289 |
| Chimney sweep (wood-burning) | $180 - $260 |
| Chimney sweep (gas appliance) | $150 - $220 |
| Single-flue cap installation | $180 - $340 |
| Multi-flue cap installation | $380 - $620 |
| Crown crack repair / coating | $450 - $890 |
| Full crown rebuild | $1,200 - $2,400 |
| Stainless steel liner installation | $2,800 - $4,500 |
| Flexible liner (offset flues) | $3,200 - $5,100 |
| Partial chimney rebuild | $3,500 - $7,000 |
| Full chimney rebuild | $8,000 - $15,000 |
Prices increase in Marietta when scaffold rental is needed for tall historic stacks, when brick matching requires sourcing from specialty yards, or when concealed damage emerges after camera inspection. We show you the camera footage and explain the scope change before any additional work proceeds. Every job gets a written price, written scope, and written warranty before work starts, Haven Standard Clause 1, with no exceptions.
Neighborhoods We Serve in Marietta
Our crews work across Marietta from the historic district to East Cobb, with scheduling coordinated from our Atlanta office. Response times are typically two to five business days for standard appointments, with emergency calls triaged same day.
- Historic Marietta Square district
- East Cobb (Walton, Pope, Wheeler zones)
- Indian Hills
- West Cobb near Kennesaw border
- Sweat Mountain area
Service Area - Cities Near Marietta
We serve homeowners throughout Cobb County and north metro Atlanta. Nearby cities include Kennesaw, GA, Atlanta, GA, Acworth, GA, and Woodstock, GA. Each has its own chimney characteristics, from Kennesaw’s similar East Cobb-era housing stock to Woodstock’s newer construction with different failure patterns.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Marietta
Most chimney repairs and liner replacements in Marietta require a Cobb County building permit, which we pull as part of our standard process. Cap installations and routine sweeps typically do not. We handle the paperwork and inspection scheduling.
Standard appointments in Marietta are typically available within two to five business days. We do not promise same-day dispatch, but emergency situations involving active leaks or suspected carbon monoxide issues are triaged immediately when you call (470) 480-0885.
Some East Cobb subdivisions require architectural review for exterior changes visible from the street, such as cap style or crown color. We provide the product specification sheet and photo mockup your HOA needs, and we schedule around their review timeline.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marietta Customers Say
"We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V.