Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
AfterChimney Cleaning in Snellville, GA
Chimney cap and crown work in Snellville usually runs $285-$1,850 depending on whether we’re sealing a hairline crack or replacing a rotted chase cover on a 1990s prefab unit. Most Snellville homeowners call us after spotting water stains on the ceiling near their fireplace, which in this area almost always traces back to a failed cap or crown on an aging zero-clearance system. You can reach us at (470) 480-0885 for a written estimate before any work starts.
We’ve inspected more than 38,000 chimneys since 2009, and the pattern in Snellville is distinct: the subdivision boom of the 1980s and 1990s left thousands of prefabricated fireplaces with lightweight chase enclosures that weren’t designed to outlast the mortgages. Our home base is Sandy Springs, but dispatch and scheduling for Snellville jobs run through our Atlanta office, with crews serving the area directly.
Why Snellville Homes Are Different
Snellville’s housing stock sits in a narrow window, roughly 1978 to 2000, when planned subdivisions like Brookwood Estates, Norris Lake, and Deer Creek went up fast with prefabricated metal-insert fireplaces instead of full masonry. These units are now 25-40 years old, at or past most manufacturers’ rated service life, yet homeowners here often treat them as permanent structures.
The local climate compounds the problem. Snellville sits in Georgia’s humid Piedmont, where mild winters produce light, tacky creosote deposits that don’t burn off, and summer humidity wicks into dormant flues. Chase enclosures clad in wood framing and stucco or hardboard siding trap that moisture, accelerating hidden rust on firebox panels and damper assemblies. The vinyl or hardboard chase covers common on these builds warp and crack in Georgia’s thermal swings, funneling rainwater directly onto the insert’s top seam. We see this constantly: the homeowner reports a “leaky fireplace,” but the real failure is a deteriorating chase cover on an aging prefab unit.
Our Main Snellville Services
Most calls from Snellville fall into three categories. Here’s where to find each one:
Chimney Sweep in Snellville
We clean and inspect prefabricated and masonry systems across Snellville, with camera documentation of the flue interior included on every visit under Haven Standard Clause 4. The light, tacky creosote common in this climate requires specific brushes and techniques to remove fully without damaging aging liner panels. Chimney Sweep in Snellville
Chimney Repair in Snellville
Repair work here centers on chase enclosures, water-damaged firebox panels, and deteriorating factory-built components that most homeowners assume are masonry. We document everything with photos and deliver a written scope and price before starting. Chimney Repair in Snellville
Fireplace Services in Snellville
Our fireplace services cover gas log sets, inserts, and factory-built unit troubleshooting for the prefab systems dominant in Snellville subdivisions. We inspect for proper clearances, gas line integrity, and manufacturer-specified termination requirements. Fireplace Services in Snellville
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterChimney Cap & Crown in Snellville
Chimney cap and crown work in Snellville is almost always chase-cover and crown-seal work on prefabricated units, not traditional masonry crowns. The 1980s-1990s builds in Brookwood Estates and Deer Creek used lightweight chase enclosures with vinyl or hardboard tops that fail predictably in Georgia’s humidity and thermal swings. When we get a “leaky fireplace” call from Snellville, the cause is usually a cracked chase cover letting water hit the insert’s top seam, not a masonry crown issue. Our Chimney Cap & Crown hub page has more on our full scope.
Chase Cover Replacement
Signs you need it
Water stains on the ceiling near the fireplace, rust dripping from the chase top, or visible warping and cracks in the vinyl or hardboard cover.
What it costs in Snellville
Chase cover replacement typically runs $650-$1,250 for standard prefab units, with custom stainless steel covers ranging $950-$1,850.
How we do it
We measure the chase opening, fabricate or order a proper galvanized or stainless steel cover with welded seams, remove the failed original, and secure the new cover with a drip edge that sheds water away from the enclosure.
Crown Coating
Signs you need it
Hairline cracks in a masonry crown surface, minor spalling, or early-stage water penetration where the crown meets the flue tile.
What it costs in Snellville
Crown coating application generally falls between $285-$550 for residential crowns up to moderate size.
How we do it
We wire-brush the crown surface, apply a bonding agent, then trowel on a flexible crown coat formulated for thermal expansion and UV resistance.
What Chimney Cap & Crown Costs in Snellville
| Item | Typical range in Snellville |
|---|---|
| Crown coating | $285 - $550 |
| Chase cover replacement (standard) | $650 - $1,250 |
| Chase cover replacement (custom stainless) | $950 - $1,850 |
How do I know if my leak is the cap or the chase cover?
Prefabricated units have chase covers, not masonry crowns; if your Snellville home was built between 1978 and 2000 in a planned subdivision, you almost certainly have a chase cover that warps and cracks in Georgia’s thermal swings. We confirm with a camera inspection and photo documentation.
Can a damaged chase cover wait until next season?
Water entering through a cracked chase cover rusts firebox panels and damper assemblies year-round, not just in burning season; we recommend addressing it as soon as staining or dripping appears. Call (470) 480-0885 for a free estimate.
Chimney Liner & Rebuild in Snellville
Chimney liner work in Snellville is often liner replacement on prefabricated units that have reached end of service life, or stainless steel liner installation where the original factory liner has corroded through. The 25-40 year age of most Snellville prefab systems means we’re regularly pulling out deteriorated aluminum or light-gauge steel liners and installing proper replacement liners rated for the appliance. Our Chimney Liner & Rebuild hub covers the full technical scope.
Stainless Steel Liner
Signs you need it
Visible rust flakes in the firebox, draft problems, or a Level 2 camera inspection revealing holes or separation in the existing liner.
What it costs in Snellville
Stainless steel liner installation typically ranges $2,400-$4,200 for standard residential flues in Snellville’s prefab and masonry systems.
How we do it
We run a camera to map the flue condition, then drop a properly sized 316Ti stainless steel liner with insulation where required by code, connecting it to a new top plate and collar.
Liner Replacement
Signs you need it
Factory-built unit beyond manufacturer service life with corroded or separated original liner, or insurer requiring current UL listing documentation.
What it costs in Snellville
Liner replacement on prefabricated units generally runs $1,800-$3,600 depending on unit size and accessibility of the chase enclosure.
How we do it
We remove the existing deteriorated liner through the chase or firebox opening, inspect the enclosure for water damage, then install a listed replacement liner with proper clearances and termination.
What Chimney Liner & Rebuild Costs in Snellville
| Item | Typical range in Snellville |
|---|---|
| Liner replacement (prefab unit) | $1,800 - $3,600 |
| Stainless steel liner installation | $2,400 - $4,200 |
| Partial rebuild (chase enclosure) | $3,200 - $6,500 |
Does my prefab fireplace even have a replaceable liner?
Most prefabricated units from the 1980s-1990s do have replaceable liners, but manufacturers set service life limits; we verify your unit’s model and condition with a camera scan before recommending replacement versus full unit retirement.
Will my insurance cover liner replacement?
Some insurers require current UL-listed liners for coverage; we provide the documented photo record and written specification that most carriers need, but coverage varies by policy. Call (470) 480-0885 and we’ll review what documentation your insurer typically requires.
Brands We Service in Snellville
We stock and install materials from Olympia Chimney, Famco, and Copperfield through our Haven buying network, with DuraFlex liners available for prefab replacement jobs. Most standard cap and liner components are on our trucks for Snellville appointments, so we’re not ordering parts that delay your job.
Pricing for Chimney Cleaning in Snellville, GA
| Service | Typical range in Snellville |
|---|---|
| Level 2 chimney inspection with camera | $225 - $325 |
| Chimney sweep and cleaning | $185 - $275 |
| Crown coating | $285 - $550 |
| Chase cover replacement (standard) | $650 - $1,250 |
| Chase cover replacement (custom stainless) | $950 - $1,850 |
| Liner replacement (prefab unit) | $1,800 - $3,600 |
| Stainless steel liner installation | $2,400 - $4,200 |
| Partial rebuild (chase enclosure) | $3,200 - $6,500 |
Prices in Snellville push toward the higher end when chase enclosures require reframing due to water damage, or when prefab units need custom-fabricated caps for non-standard chase dimensions. Every job gets a written price, written scope, and written warranty before work begins, under Haven Standard Clause 1.
Neighborhoods We Serve in Snellville
We work across Snellville’s core subdivision areas, with crews typically scheduling within a few days for standard inspections and sweeps. The prefab-heavy housing stock in these neighborhoods drives most of our cap, crown, and liner calls.
- Brookwood Estates
- Norris Lake
- Deer Creek
- Centerville North
- Snellville Oaks
Service Area - Cities Near Snellville
Our crews cover the full Gwinnett County corridor and adjacent areas. We regularly schedule work in Lawrenceville, GA, Clarkston, GA, Duluth, GA, and Decatur, GA, with the same camera-documentation standard and written pricing on every job.
Serving Snellville, GA - Our Local Coverage Area
We’re based in the Snellville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Snellville
Gwinnett County requires permits for structural chimney modifications and liner replacements, but not for standard cleaning, inspection, or cap replacement; we handle permit applications as part of any job that requires them, with the scope and price documented in writing first.
We typically book Level 2 inspections and sweeps within 3-5 business days in Snellville, with faster scheduling available for water-intrusion emergencies; call (470) 480-0885 and we’ll find the next available slot.
We provide a documented photo record and written inspection report on every visit under Haven Standard Clause 4, which satisfies most Snellville HOA requirements for fireplace and chimney verification at resale or renewal.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Snellville Customers Say
"They ran a camera down the flue and showed me the cracked tiles on a screen. The previous company had swept it twice and never mentioned it."
- Gregory F."Found a bird nest and a blocked flue we had no idea about. Photographed everything, cleared it, and explained what the smell had been."
- Curtis V."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.