Famco Chimney Liner & Rebuild Nationwide

Famco Chimney Liner & Rebuild in Sandy Springs: What to Know First

We provide independent Famco chimney liner and rebuild service in Sandy Springs, typically quoting the job within 48 hours of your call and completing most liner replacements in one day. Every Famco job starts with a camera-scan inspection, a written price before any work begins, and a documented photo record when we’re done. If you own a Famco chimney component and need liner repair, partial rebuild, or full chimney rebuild, call (470) 480-0885 for a free estimate.

Call (470) 480-0885

How Famco Products Fail - and How We Fix Them

• Famco 316Ti flexible liners in Sandy Springs clay flues. The titanium-stabilized steel resists acid well, but we’ve found the 6-inch and 8-inch diameters can crease at the first offset in pre-1980s Sandy Springs ranch homes near Abernathy Road, where builders used abrupt 45-degree turns to clear hip roofs. The crease traps moisture from our humid summers and starts pinpoint corrosion from the outside in. We pull the damaged section, measure the offset with a laser, and specify either a custom-rolled Famco replacement or a DuraFlex equivalent with thicker wall stock if the run is particularly tortured.
• Famco galvanized telescoping liners in vented gas systems. These shorter runs were common on 1990s furnace retrofits around Sandy Springs. The galvanized coating degrades from the inside once condensing efficiency exceeds 83% on a modern replacement furnace, which many homeowners don’t discover until the HVAC contractor points out flue gas spillage. We scope the full run, and if the galvanized wall is scaling, we replace with a Famco 316Ti or AL29-4C alloy liner rated for the actual appliance, not the original one.
• Famco single-wall rigid sections in exterior chase rebuilds. When a Sandy Springs chimney rebuild exposes the flue, we sometimes find these rigid sections were cut with a abrasive saw that left a heat-affected zone at the seam. That zone cracks in freeze-thaw cycles, which in Sandy Springs means late January through mid-March. We cut back to sound metal with a carbide blade, sleeve with a Famco flex liner if the chase geometry allows, or switch to Olympia Chimney rigid if the straight run is long enough to justify it.
• Famco top-sealing dampers integrated with concrete crowns. The cast-aluminum frame is solid, but the stainless cable runs through a compression fitting that seizes when crown cracks let water wick down the wire. In Sandy Springs, crown deterioration accelerates where tree canopy keeps the masonry damp 48 hours after rain. We don’t just free the cable. We remove the damper, document crown integrity with the camera, and quote crown repair or rebuild before reinstalling any Famco or aftermarket damper.
• Famco liner collars at the thimble connection. The stamped collar on older Famco flex liners can work loose where it meets a terracotta thimble in a Sandy Springs basement utility room. Vibration from the nearby HVAC air handler doesn’t help. We’ve found the collar itself is often fine; the failure is the original installer using sheet-metal screws into crumbly terracotta instead of a proper anchor system. We fabricate a stainless backer plate, seal with high-temp silicone rated to 600°F, and mechanically fasten to sound masonry or the new liner wall.

Our Famco Chimney Liner & Rebuild Process

1. 1
   Call and schedule. A live person answers. We ask the Famco model or series if you know it, the appliance type, and when you last had a camera inspection. We book a two-hour window.
2. 2
   Camera-scan inspection. Our tech runs the camera the full flue length, records the footage, and stops at every joint, offset, and connection. The camera doesn’t guess. Neither do we.
3. 3
   Written scope and price. Corrine Halstead reviews the footage with the tech, selects Famco OEM or quality aftermarket parts from our Haven buying network, and delivers a written price, written scope, and written warranty before any work starts. Clause 1 of the Haven Standard.
4. 4
   Repair or rebuild. We protect your floors, remove the failed Famco component, install the replacement to NFPA 211, and pressure-test or smoke-test as appropriate.
5. 5
   Documentation and walkthrough. You receive the photo record, the camera footage, and the completed scope of work. Clause 4 of the Haven Standard, running since 2009.
6. 6
   365-Day Done Right Promise. If it’s not done right, we make it right. The promise is stamped on every job.

Before

After

What Famco Chimney Liner & Rebuild Costs in Sandy Springs

These are Sandy Springs market ranges based on our 38,000+ jobs since 2009. Your exact price comes after the camera inspection. Estimates are free. Call (470) 480-0885.

Why Sandy Springs Homeowners Call Emberly Chimney Cleaners Sandy Springs for Famco Work

We’re an independent Famco service provider, not a dealer, which means we source the right part for your flue rather than the part in a distributor’s monthly promotion. Our techs carry Famco, DuraFlex, HeatShield, and Gelco on the truck, so the job doesn’t stall waiting for a single-brand delivery. The 365-Day Done Right Promise applies to every liner and rebuild we touch. Background-checked, uniformed crews. License number on the page. A text when your tech is on the way. And a free second opinion on any competitor’s written estimate, because Clause 1 means you should see the price in writing before anyone starts.

FAQs