Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
AfterFamco Chimney Cap & Crown in Sandy Springs: What to Know First
We provide independent Famco chimney cap and crown service in Sandy Springs, with most cap replacements and crown repairs scheduled within a week and completed in a single visit. Every job starts with a camera inspection down the flue, followed by a written price and scope before any work begins. We’re not here to sell you a full rebuild when a $280 cap swap solves the problem.
This page is for Sandy Springs homeowners who already have a Famco cap or crown installed and need honest answers about what’s failing, what it costs to fix, and whether the repair preserves any remaining warranty. Call us at (470) 480-0885 for a free estimate, or read on for the specifics.
How Famco Products Fail - and How We Fix Them
- Famco 13×13 Galvanized Single-Flue Caps: The baked-on enamel finish on early production runs chalks faster in Sandy Springs’ humidity than in drier climates. We see bare metal spotting at the four-year mark, especially on homes near the Chattahoochee where morning dew lingers. We replace with a Famco-compatible 304 stainless cap or, if the budget’s tight, a Gelco equivalent with a 20-year rust warranty.
- Famco Multi-Flue Caps with Mesh Sides: The 5/8-inch mesh on the 1100 and 1200 series traps pollen and cottonwood seed from Sandy Springs’ spring canopy. Homeowners call us in May thinking they have a flue blockage; it’s actually mesh so clogged that draft drops 40 percent. We pull the cap, document the restriction with the camera, and either clean and reseat or upsize to 3/4-inch mesh if the local wildlife ordinance allows.
- Famco Draft King Caps with Integrated Dampers: The stainless cable housing on pre-2018 units seizes where it passes through the chimney crown. The damper won’t open fully, and the homeowner gets smoke rollout on the first cold snap. We cut the crown around the cable entry, free or replace the cable, and repour with a sloped crown that sheds water away from the mechanism. Corrine Halstead has handled three of these on Abernathy Road ranches this season alone.
- Famco Wind-Resistant Caps (Model WR Series): The baffle design that blocks downdraft also creates a low-pressure zone that pulls fine ash back into the firebox on windy days. Sandy Springs sits at the western edge of the Piedmont; northwest winter winds hit 25 mph sustained. We verify with a smoke pencil test, then either adjust baffle angle or swap to a Vacu-Stack equivalent if the fireplace is the primary heat source.
- Famco Crown Wash Under Any Cap: Famco doesn’t manufacture crowns, but their caps get blamed when the real problem is the crown beneath. We see this constantly: a perfectly good cap installed on a crowned chimney with 1/8-inch cracks that channel water straight to the flue liner. Our camera shows the water track on the liner wall. We repair the crown with HeatShield CrownCoat or a full pour if the structural concrete is compromised, then reinstall the existing cap if it’s sound.
Our Famco Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers 24/7. We ask for the Famco model number if you have it, the chimney dimensions if you don’t, and whether you’re seeing water, draft issues, or animal entry.
- 2
Camera inspection on arrival. Our tech runs an NFPA 211 Level 2 scan, Clause 4 of the Haven Standard. The camera doesn’t guess. Neither do we. We document liner condition, crown integrity, and cap fit in a photo record you receive by email.
- 3
Written price before work. Haven Standard Clause 1: have it in writing. The scope lists every part, labor line, and warranty term. No surprises, no pressure. You approve or we leave, inspection in hand, no charge for the visit.
- 4
Parts decision with trade-offs explained. OEM Famco cap, quality aftermarket from our buying network, or multi-flue upgrade. We stock Gelco and Olympia Chimney equivalents through Haven’s procurement. You choose; we install.
- 5
Repair and test. Cap seated and sealed, crown coated or poured, damper cycled ten times, smoke pencil for draft verification. Photos of the completed work added to your record.
- 6
Cleanup and documentation. Written warranty, 365-Day Done Right Promise stamped, invoice with license number. Your chimney archive is complete for insurance or resale.
BeforeAfterWhat Famco Chimney Cap & Crown Costs in Sandy Springs
| Service | Typical Range |
|---|---|
| Famco single-flue cap replacement (stainless) | $280 - $420 |
| Famco multi-flue cap replacement | $480 - $720 |
| Crown repair with HeatShield CrownCoat | $380 - $580 |
| Full crown pour (includes cap reseat) | $1,200 - $1,800 |
| Draft King cable housing repair | $340 - $520 |
| Mesh upsize or cleaning with reseat | $180 - $280 |
What moves the price: chimney height and roof pitch (ladder work versus lift), crown square footage, whether the flue liner needs repositioning before the cap seats clean, and whether we’re matching an existing Famco finish or switching materials. We quote every variable in writing before starting. Call (470) 480-0885 for your exact number - estimates are free.
Why Sandy Springs Homeowners Call Emberly Chimney Cleaners Sandy Springs for Famco Work
We’ve inspected over 38,000 chimneys since 2009, every one with a photo record and a written price first. Our background-checked, uniformed techs carry Famco, Gelco, Olympia Chimney, and HeatShield parts on the truck, so we’re not ordering blind and charging you twice for a return trip. The 365-Day Done Right Promise covers every cap and crown job: if it leaks, if it rusts, if the draft fails, we make it right. Free Second Opinion on any competitor’s written estimate. Live phone support, 24/7. We’re independently owned and operated under the Haven Standard, not a franchise, not a call center.
FAQs
No, if the repair uses Famco OEM or equivalent-spec parts and doesn’t modify the mounting system. As an independent Famco service provider, we document every part number and installation detail so any remaining warranty stays intact. If your cap is under Famco’s original warranty, we flag that before quoting and can coordinate a manufacturer claim if the failure is clearly defective. Call (470) 480-0885 and we’ll check your model year against Famco’s coverage terms.
Most single-flue replacements are done in 90 minutes, multi-flue in two to three hours. Crown repairs add two hours for curing if we use CrownCoat, or a return visit for full pours. We schedule realistic windows, not fantasy ones, and text when the tech is en route.
We stock black, galvanized, and copper-tone stainless from Famco-compatible suppliers. Exact color match to faded enamel isn’t always possible after years of UV exposure; we show you the sample before cutting metal. Most Sandy Springs homeowners choose to match the roof hardware instead.
The camera tells us. Water stains on the liner below the cap mean crown failure; rust on the cap body with a dry liner means cap failure. We show you both on screen before quoting. Sometimes it’s both, and we price each separately so you can phase the work.
Annually, per NFPA 211, same as the chimney itself. Sandy Springs’ oak canopy drops debris year-round, and our humidity cycle accelerates galvanized corrosion. We find problems at inspection that cost $200 to fix instead of $1,500 after water reaches the liner. Call (470) 480-0885 to schedule - estimates are free.
Written by Corrine Halstead, Owner, Emberly Chimney Cleaners Sandy Springs at Emberly Chimney Cleaners Sandy Springs, serving Sandy Springs and nearby areas.